Installing and Configuring the Enlighten Control Wing

Make sure the control wing is connected to the pc with the supplied USB cable and the Control wing has the power adaptor plugged in to the back of the wing. When the control wing is connected and recognized by Windows, the blue line below the Enlighten logo will be a solid blue color.

If you are using XP, Vista, or Windows 7 all drivers will load automatically.

To enable Enlighten to recognize the wing when using XP folow these steps:

    1. Go to the settings window

    2. On the settings window press the Midi Settings tab


3. From the list select the "USB Audio Device" and press done. The wing can now control Enlighten. If you do not get a response right away. Close Enlighten and re-Open the program.

For Vista and Windows 7,8 and 10 users, the wing will automatically be enabled and detected as long as it is plugged in first and recognized before Enlighten is started.